[CS-FSLUG] Setting up a Wireless Network
@ndrew
andrew at dothedrew.net
Mon Jun 7 10:56:05 CDT 2004
> I guess by running a cable from the old router's
> "uplink port" (which doubles as the first port of
> the switch normally) to the new router's WAN/Internet
> port
If you're going to use two routers, I'd think you'd be better off running a
cable from the uplink port on the old router to one of the four "LAN" ports
on the new router. Then just choose one of the routers to use as a router.
The other one would bascially function as a switch. If you're using DHCP,
make sure it's only enabled on the router you're going to use, otherwise,
just make sure that all the clients have the correct gateway specified.
--
@ndrew
andrew at dothedrew.net
http://www.dothedrew.net
"No man has a good enough memory
to be a successful liar."
Abraham Lincoln
> -----Original Message-----
> From: Christiansource-bounces at ofb.biz
> [mailto:Christiansource-bounces at ofb.biz] On Behalf Of Timothy
> R. Butler
> Sent: Saturday, June 05, 2004 2:53 PM
> To: A Christian virtual Free Software and Linux Users Group.
> Subject: [CS-FSLUG] Setting up a Wireless Network
>
> Hi everyone,
> I was wondering if someone could shed a bit of light on
> wireless networking for me?
>
> 1.) I have an existing wired router switch (4-port
> Linksys) and I'd like to keep it on the network to go along
> with a new Linksys wireless 802.11g router (which also has a
> 4-port switch thus allowing me to have more wired
> connections). So here's what I need to do: I need to link the
> old router to the new router, I guess by running a cable from
> the old router's "uplink port" (which doubles as the first
> port of the switch normally) to the new router's WAN/Internet
> port, and then -- if I understand correctly -- switch the new
> router to "Dynamic Routing"
> from "Gateway" so that it knows there is another router in
> town. Does this sound like it should work? Would I be better
> off to rid myself of the wired router and buy a plain old
> switch to accompany the new router if I need more than 4-ports?
>
> 2.) If I need to get a few GNU/Linux boxen going on
> this network, are Linksys cards any good for GNU/Linux
> networks? Other recommendations?
> Particularly, I need one for a desktop, preferably a
> USB/external one so that I can position the antenna in a
> better location, and one for a notebook (cardbus).
>
> Main objective, other than getting it to work: getting
> it to work for as little as possible.
>
> Secondary objective: to stick with Linksys products if
> possible -- I've had a lot of success with them in the past,
> and I'd prefer to stick to one networking company if possible.
>
> Suggestions?
>
> Thanks,
> Tim
>
> ---------------------------------------------------------------
> Timothy R. Butler Universal Networks www.uninet.info
> ==================== <tbutler at uninet.info> ====================
> | Christian Portal: | Have you not learned great lessons |
> | www.faithtree.com | from those who braced themselves |
> | GNU/Linux News: | against you and disputed the |
> | www.ofb.biz | passage with you? --Walt Whitman |
> ---------------------------------------------------------------
> Presently on "Albert" (DP PPC 970 "G5" running at 2.0 GHz)
>
>
> _______________________________________________
> ChristianSource FSLUG mailing list
> Christiansource at ofb.biz
> http://cs.uninetsolutions.com
>
>
More information about the Christiansource
mailing list